How to install sliding cabinet shelves

Standard shelves and rails can support between 20 — lbs. Shelves with steel grade rails can hold — lbs. Declutter and clean that closet.

Relocate your closet items. Install adjustable shelving. Cabinet shelves are typically made from either particleboard or plywood. You can remove the old shelves and install new ones yourself using a saw and a few hand tools. Refurbishing cabinet shelves is an ideal way to add value to your kitchen or make it more comfortable.

Sand any rough edges. Use wood glue and finishing nails to connect the three pieces to form the shelf bracket. Popular adhesive strips include Command picture hanging strips, Scotch reclosable fasteners, and Velcro removable mounting strips. The taller the side means you will want to mount the slide more in the middle.

On shorter h drawers you can mount them middle or at the bottom and it will work fine. On shorter drawers that you make, if you make them with the bottom applied to the sides, by mounting them to the bottom you can hide the plywood edge. Insert the Drawer Hold the drawer level in front of the cabinet.

Place the ends of the slides attached to the drawers into the tracks inside the cabinet. Pressing evenly on each side of the drawer, slide the drawer into place. The runner will fit flush along the bottom edge of the drawer. The wheel will be at the back with the front of the runner tight against the back of the drawer front.

There are holes in the runner for this purpose. Mounting location: Side mounted drawer slides are the most popular and easiest to install. Center mount and undermount are also options. The slide mechanism can also be found in modern chests of drawers. Pull-Out Storage Cabinets are one of the most unique pantry ideas around. They allow you to stash away small items in a convenient place with adjustable shelves. Finally, you no longer have to worry about digging through multiple small items in search of the salt.

Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Things You'll Need. Related Articles. Author Info Last Updated: March 29, Part 1. Measure the width and depth of the cabinet in which you would like to place sliding shelves. Compare those measurements to pre-made sliding shelves available online, at home improvement stores or through cabinet companies.

Order the sliding shelves that fit your cabinets. If you want to do several layers of shelves, it is best to start with bottom sliding shelves and move to the middle or top only when you know you will have space for several racks. Remove the shelves from the packaging. Check them to ensure they were not damaged. Lay the drawer, base mount screws and brackets on the kitchen floor by the cabinet. Compare the mounting screws with your drill bits. Insert and lock in a Philips head or other drill bit that will fit into the screw heads.

Part 2. Pick up the drawer slides. Check to see if they have brackets already attached to them. The brackets are the point at which you will screw the sliding shelf into the cabinet. Turn the pull out drawer so that the front is facing the ground. Check the correct sides for the drawer slides by sliding them onto either side of the pull out drawer. Place the drawer with slides into the kitchen cabinet to be sure it is the correct size. Align the drawer with the cabinet itself. Close the door of the cabinet.

Part 3. Pull the drawer forward. Expose the brackets in the back. Make sure the brackets are flush with the bottom surface and facing down. Screw the brackets down using a mounting screw and your drill.

Use one of the circular or oblong screw holes closest to the drawer slide. Pull the drawer all the way forward. If possible, pull it all the way out to gain access to the front brackets. Screw the front brackets down with mounting screws and your power drill. Also, choose the holes closest to the drawer slide. Test the drawer again. If it is in the right place, screw a mounting screw into the center of each bracket.

If it is not, remove the screws with the drill and reposition the brackets and drawer.